Raya Energy
Fitment recommendation

2010 Mitsubishi Raider battery

2 engine variants — recommendation differs by engine, find yours below.

This is an estimated fit inferred from the vehicle class — not verified for this exact trim, engine and model year. Confirm the group size on your current battery's label or owner's manual before buying, or contact us to check.

Standard engine

BCI Group 65Flooded lead-acid600+ CCAEstimated fit
65-XD-Z
Flooded·Group 65

65-XD-Z

850 CCA138 min RC80 Ah

Standard engine

BCI Group 35NFlooded lead-acid580+ CCAEstimated fit
35N-Z600
Flooded·Group 35N

35N-Z600

600 CCA113 min RC60 Ah
35N-Z540
Flooded·Group 35N

35N-Z540

540 CCA113 min RC55 Ah

Frequently asked about the 2010 Mitsubishi Raider

What battery does a 2010 Mitsubishi Raider take?
Depending on the engine variant, the 2010 Mitsubishi Raider takes a BCI Group 65 or 35N battery. Confirm your engine — see the per-engine recommendations above.
How many CCA does a 2010 Mitsubishi Raider need?
OEM specifies at least 600 CCA (cold cranking amps). In Canadian winters, anywhere from 600 to 720 CCA is sensible — higher CCA gives more starting headroom on the coldest mornings without affecting normal operation.
Does my 2010 Mitsubishi Raider need AGM?
AGM isn't required for the standard 2010 Mitsubishi Raider fitments listed above — flooded chemistry is fine. AGM is still a sensible upgrade for cold-climate use or high-accessory-load vehicles.

Adjacent model years

2008 Mitsubishi Raider2009 Mitsubishi Raider2011 Mitsubishi Raider2012 Mitsubishi Raider